0948279988
Products  Testing Equipments footwear industry

Water Vapour Absorption Tester

Model: H052
Producer: HiLAB-Portugal
Giá: Contact
The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.

Ứng dụng sản phẩm

  • Determining the coefficient of water vapour on leather and non-leather upper (water vapour absorption), according EN ISO 20344:6.7; EN ISO 17229; ISO 17699; TM172.

Thông số kỹ thuật

  • Weigh the conditioned test sample and record the mass as m1.
  • Place 50 ml of water into the container and place the test piece over the container with the side facing the foot downwards.
  • Place the impermeable disc over the test piece and screw down firmly.
  • Ensure that no water laps against the bottom of the test piece.
  • Remove the test piece after 8 h and weigh immediately, recording its mass, m2.
  • Calculate the water vapour absorption using the formula W₁= (m₂-m₁)/a.

Tiêu chuẩn

  • EN ISO 20344:6.7;
  • EN ISO 17229;
  • ISO 17699;
  • TM172.

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Thickness Measuring Gauge for leather
Model: H046/1
Producer: HiLAB-Portugal
  • Used to measure the thickness of leather panels, measure the thickness of details in leather products to calculate the increase or decrease in product thickness.
Buy product
ROSS Flexometer
Model: H014
Producer: HiLAB-Portugal
  • Determine the resistance of polymeric materials to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to ISO 4643:Annex C; ISO 5423:Annex C; ASTM D1052.
Buy product
Rub Fastness Tester with 2 stations
Model: H064
Producer: HiLAB-Portugal
  • Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.
Buy product
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Rubber abrasive machine-No.151
Model: Rubber abrasive machine-No.151
Producer: TESTEX-China
  • DIN Abrasion Tester is used to determine the wear resistance of ductile materials, such as rubber, tires, leather, etc. Furthermore, it complies with DIN 53516, ASTM D5963-04, ISO 4649, ISO 20344, etc.
Buy product
Martindale Abrasion Tester with 9 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.
Buy product
Leather Grain Crack Tester
Model: H076
Producer: HiLAB-Portugal
  • Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Water Vapour Permeability Tester
Model: H050
Producer: HiLAB-Portugal
  • The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...
Buy product
BENNEWART Flexometer
Model: H011
Producer: HiLAB-Portugal
  •  Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.
Buy product
Wear and Corrosion Apparatus
Model: H063
Producer: HiLAB-Portugal
  • Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...
Buy product
Chainsaw Cutting Tester
Model: H070
Producer: HiLAB-Portugal
  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.
Buy product
Whole Shoe Flexometer with 4 stations
Model: H009
Producer: HiLAB-Portugal
  • Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking
Buy product
Velcro Fatigue Tester
Model: H019
Producer: HiLAB-Portugal
  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.
Buy product
Heat Resistance Tester
Model: H027
Producer: HiLAB-Portugal
  • The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube