Martindale Abrasion Tester with 9 stations

Ứng dụng sản phẩm
Thông số kỹ thuật
Tiêu chuẩn
Video

Ứng dụng sản phẩm

The machine is used to determine the abrasion and knotting resistance of fabrics using the Martindale method
The machine is suitable for testing woven and knitted fabrics, fabrics, and non-woven fabrics
Martindale's fabric is available with 9
The Martindale Abrasion Test was developed primarily to evaluate the abrasion resistance of wool and textile fabrics and is not suitable for fabrics with surface coating.
The Martindale is equipped with an advanced 7” Touchscreen controller that provides the operator with an easy-to-read display and simple controls to operate the machine. The emergency stop switch is located for ease of use if the operator needs to stop the machine quickly.
Martindale is capable of operating within 24 hours. The test time is calculated from when the machine started and the current time. For the calculation to be accurate, it is necessary to set the correct time
Martindale can be configured to perform tests requiring different wear patterns. The equipment delivered is set up for standard abrasion testin

Thông số kỹ thuật

The main parts of the equipment are made of stainless steel, aluminum, and technical plastics, to avoid oxidation, even in wet tests.
The quality of the materials and their finish ensures uniform, smooth and no vibration movement of the holder guide plate.

Tiêu chuẩn

ISO 12947-1;
EN ISO 5470-2;
EN ISO 20344:6.12;
EN ISO 17704;
EN ISO 12945-2.

Video

Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88

⇒ Or leave a message and we will call you directly. Thank you very much!

Other products

Electronic Lastometer

Model: H020

Producer: HiLAB-Portugal

Used to analyze the static properties of tensile and compression, bending, shearing, peeling, tearing, retaining, retarding, reciprocating, etc.

Buy product

Crockmeter Tester hand driven

Model: H066

Producer: HiLAB-Portugal

This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.

Buy product

Heel Impact Tester

Model: H085

Producer: HiLAB-Portugal

Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

Heat Resistance Tester

Model: H027

Producer: HiLAB-Portugal

The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Buy product

Leather Grain Crack Tester

Model: H076

Producer: HiLAB-Portugal

Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...

Buy product

Toe Caps Impact Tester

Model: H081

Producer: HiLAB-Portugal

Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
Changing tools (striker or clamping device) is a very easy and quick operation

Buy product

Water Vapour Absorption Tester

Model: H052

Producer: HiLAB-Portugal

The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.

Buy product

BENNEWART Flexometer

Model: H011

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.

Buy product

Lace to Lace Abrasion Tester with 6 stations

Model: H067

Producer: HiLAB-Portugal

Shoe lace-to-lace abrasion tester, it is used to determine the abrasion resistance of shoelaces by abrasion...

Buy product

Wear and Corrosion Apparatus

Model: H063

Producer: HiLAB-Portugal

Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...

Buy product

ROSS Flexometer

Model: H014

Producer: HiLAB-Portugal

Determine the resistance of polymeric materials to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to ISO 4643:Annex C; ISO 5423:Annex C; ASTM D1052.

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

BALLY Penetrometer

Model: H033

Producer: HiLAB-Portugal

The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...

Buy product